• All
  • 2022
  • 2021
  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 2010
  • 2009
  • 2008
  • 2007
  • 2006
  • 2005
  • 2004
  • 2003
  • 2002
  • Modification of Nano-silica by Silane Coupling Agent and Isocyanate to be Applicable in Property Enhancement in Automobile Coating
    NANOICON – 2022 Conference paper with “AIP Proceedings”
    11 – 15 January, 2022
  • Influence of Surface Modified Nano-silica by triallyl Isocyanurate on the Thermal and Mechanical Properties of Acrylated Polyurethane
    International e-conference on Nanomaterials Nano Engineering. APA NANOFORUM-2022
    22 – 26 February, 2022
  • A ternary hybrid nanocomposite proton exchange membrane with improved proton conductivity and higher selectivity
    Recent Advances in Materials Chemistry-RAMC-2021
    08 – 09 March, 2021, Online mode
  • Base coat of Automobile Paint derived from Castor Oil: Enhancement in properties by Nanoscale Reinforcement
    Advanced Polymeric Materials (APM)-2021
    09 – 13 March, 2021
  • Bio-based Polyurethane coating synthesized from Modified Castor oil-Applicable in Base coat of Automobile paint
    Conference of South African Advanced Materials Initiative (COSAAMI-2021)
    18 – 22 October, 2021
  • Highly Selective Polyvinylidene fluoride (PVDF) based nanocomposite membranes for fuel cell applications
    4th International Conference on Soft Materials (ICSM)
    13 – 18 December, 2020, Online mode
  • Bio-based Automobile paint: Anewera of Research
    International Conference on “Frontiers in Manufacturing Technology” (FMT-2020)
    13 – 14 October, 2020
  • Cobalt Manganese Layered Double Hydroxide as Electrode Material for High Performance Supercapattery
    International Conference on Advancements in Polymeric Materials (APM 2020)
    13-15 February 2020, Bengaluru
  • Synthesis of Polyaniline (PANI)/SWCNT Composite and its Study as Cathode Material In Dye Sensitized Solar Cell
    International Conference on Advancements in Polymeric Materials (APM 2020)
    13-15 February 2020, Bengaluru
  • Synthesis and characterization of DPP-carbazole small molecule via direct C-H arylation
    International Conference on Advancements in Polymeric Materials(APM 2020)
    13-15 February 2020, Bengaluru
  • Development of functionalized guargum based biofilm and its physiological study for dry stuff packaging application
    International Conference on Advancements in Polymeric Materials (APM 2020)
    13-15 February 2020, Bengaluru
  • N-doped Carbon Coated 3D–Bi2O3 as a Negative Electrode for High Performance Supercapacitors
    International Conference on Advancement in Polymeric Materials (APM 2020)
    13-15 February 2020, Bengaluru
  • Three-Dimensional Hierarchical Fe2O3 Nanoflake/Ni Network as an Electrode Material for High Performance Supercapacitors,
    International Conference on Advancement in Polymeric Materials (APM 2020)
    13-15 February 2020, Bengaluru
  • Cobalt based Metal Organic Framework (Co-MOF) as an Excellent Electrode Material for Hybrid Supercapacitor
    International Conference on Advancement in Polymeric Materials (APM 2020)
    13-15 February 2020, Bengaluru
  • Transparent and UV - IR Resisting Coating for Automobile Applications
    International Conference on Advancement in Polymeric Materials (APM 2020)
    13-15 February 2020, Bengaluru
  • Binder-Free 3D-Bi2O3 Nanostructure Electrode for High Performance Electrochemical Supercapacitors
    64th DAE Solid State Physics Symposium (DAE SSPS), IIT Jodhpur
    18-22 December 2019, Rajasthan
  • Fabrication of polyethersulfone (PES) membranes for biomedical applications: Porosity and biocompatibility
    International Conference on Natural Polymers,Biopolymers, Biomaterials their composites, Nanocomposites, Blends IPNS, Polyelectrolytes and gels: MACRO to NANO SCALES
    6-8 December 2019, Kerala
  • Characterization and Cytocompatibility Evaluation of Porous Cellulose Acetate Membranes for future biomedical applications
    International Conference on Natural Polymers,Biopolymers, Biomaterials, their composites, Nanocomposites, Blends IPNS, Polyelectrolytesand gels: MACRO to NANO SCALES
    6-8 December 2019, Kerala
  • Flexible and Binder-Free MoO3/Ti Thin Films as an Anode for High-Performance Supercapacitors
    International Conference on Nanoscience and Nanotechnology (ICNAN 2019)
    29 Nov-1 Dec, 2019, Vellore
  • Electrochemical synthesis and characterization of ITO modified polypyrrole/chitosan/zinc oxide electrode for the application of cholesterol biosensor
    International Conference on Polymer Chemistry (ICPC 2019)
    9th November 2019, Bhubaneswar
  • Synthesis and characterization of Nano hybrid based UV and IR resisting coating for Automobile applications
    International Conference on Advances in Polymeric Materials & Human Healthcare (APA 2019)
    16-18 October 2019, Goa
  • Synthesis and characterization of conjugated ter polymer for solar cell application
    International Conference on Advances in Polymeric Materials & Human Healthcare (APA 2019)
    16-18 October 2019, Goa
  • Conjugated Terpolymer as a Barrier Layer to Suppress Back Electron Transfer and Enhance Efficiency in DSSC
    International Conference on Advances in Polymeric Materials & Human Healthcare (APA 2019)
    16-18 October 2019, Goa
  • Nanosilica filled EPDM/Kevlar fiber hybrid nanocomposites
    International Conference on Advances in Mineral, Metals, Materials, Manufacturing and Modelling (ICAM5 2019)
    25-27 September, 2019, Warangal
  • Scratch improvement of Automobile Paint
    Interdisciplinary Research and Innovation Conference (IRIC 2019)
    17-20 September, 2019, Durban, South Africa
  • Synthesis and Characterization of Bio-Based Polyurethane and Its Nanocomposite from Crude Glycerol and Castor Oil,
    International Conference on Advancements in Polymeric Materials (APM-2019)
    Jan 22-24 2019, Chennai
  • Effect of Nanocellulose on Toughened PLA / EVA /Hydrolysed EVA Ternary Blend System,
    International Conference on Advancements in Polymeric Materials (APM-2019)
    Jan 22-24 2019, Chennai
  • Synthesis and characterization of functional copolymers for membrane application
    International Conference on Advancements in Polymeric Materials (APM-2019)
    Jan 22-24 2019, Chennai
  • Development of Membranes for Water Treatment
    International Conference on Advancements in Polymeric Materials (APM-2019)
    Jan 22-24 2019, Chennai
  • Effect of Cyclic Microcellular Foaming on Dielectric Properties,
    International Conference on Advancements in Polymeric Materials (APM-2019)
    Jan 22-24 2019 Chennai
  • A Review on Manufacturing Technologies of Microcellular Polymers,
    International Conference on Advancements in Polymeric Materials (APM-2019)
    Jan 22-24 2019, Chennai
  • Isolation of nanocellulose from pineapple peel waste
    International Conference on Advancements in Polymeric Materials (APM-2019)
    Jan 22-24 2019, Chennai
  • Ternary Composite Materials for Platinum free Counter Electrodes in Dye Sensitized Solar Cell Applications
    International conference on exploring nanostructures for enhanced power conversion efficiency of solar cells (ICENES 2019)
    Jan 7-8 2019, Dindigul.
  • Comparative study of recycled PVC (rPVC) recovered from waste electrical and electronics equipments
    Fourth International conference on Reuse and Recycling of Materials
    March 9 – 11, 2018, Kerala
  • Development of recycled blend based on plastic housing materials from computers, with its cables and wires
    Fourth International conference on Reuse and Recycling of Materials
    March 9 – 11, 2018, Kerala
  • Development of polymer composites with enhanced thermal conductivity characteristics
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Eco-friendly Polydimethylsiloxane (PDMS)- Epoxy blend coatings for marine application
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Synthesis & characterization of low cost non-fluorinated aqua-repellent coating
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Effect of moisture absorption on degradation of FRP composites laminate and durability of FRP laminates exposed with sea water environment, simulate the moisture absorption using FEA analysis
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Comparison of mechanical, electrical and thermal properties in graphene oxide and reduced graphene oxide filled epoxy nanocomposite adhesives
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Preparation and Characterization of Hybrid Porous Composite blocks using Polymeric binder for Industrial applications
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Contemporary Methodology for the Synthesis of Surface Functionalized Silica Coated Graphene Nanohybrid
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Anticorrosion properties of SDBS doped Polyaniline-Fe2O3 (APTES modified) on mild steel
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Anticorrosion properties of SDBS doped Polyaniline-Fe2O3 (APTES modified) on mild steel
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Dynamic mechanical, thermal and morphological analysis of PP reinforced sisal fibre and carbon fibre hybrid composites
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Coating Evaluation of Graphene Oxide/Waterborne Epoxy Acrylate Nanocomposite on Mild Steel
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Synthesis and Characterization of Polyurethane from Castor Oil, Functionalized with Glycidol and Siloxane for Biomedical applications
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Bio-Based Tri-Functional Epoxy Resin (TEIA) Blend Cured with Anhydride (MHHPA) Based Cross-Linker: Thermal, Mechanical and Morphological Characterization
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Studies on HTPB Based TPU-Halloysite Nanocomposites
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Synthesis and Characterization of Poly (Dodecyl Lactate Acrylate)
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Synthesis and Characterization of Itaconic Based Elastomer and its Blends with Poly(Lactic Acid)
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Effect of Bio-based Epoxidised Soybean Oil on the Melt Compounded PVC/PMMA Recycled Blend: A Special Insight to Compatibilization and Value Addition
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • PVDF Nanohybrid Membrane For Water Purification
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Sulfonated Reduced Graphene Oxide Incorporated Poly(ethylene oxide), Poly(vinylidene fluoride-co-hexafluoropropylene) Blend as a Novel Polymer Electrolyte System with Enhanced Ionic Conductivity
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Bio degradable packaging lm from renewable resources
    International Conference on Advancements in Polymeric Materials (APM 2018)
    February 2-4, 2018, Bhubaneswar
  • Chemical synthesis of Polyaniline-SiO2 (APTES modified) nanocomposite and its corrosion protection performance on mild steel
    Fourth International Symposium on Advances in Sustainable Polymers 2017 (ASP 2017)
    January 08-11, 2018 Guwahati, India
  • Bio-inspired dopamine functionalized polypyrrole counter electrode for dye sensitized solar cell application
    Fourth International Symposium on Advances in Sustainable Polymers 2017 (ASP 2017)
    January 08-11, 2018 Guwahati, India
  • Zwitterionic–polyurethane coatings for non-specific marine bacterial inhibition: A nontoxic approach for marine application
    Fourth International Symposium on Advances in Sustainable Polymers 2017 (ASP 2017)
    January 08-11, 2018 Guwahati, India
  • Chitosan based freestanding electrode for supercapacitors
    Fourth International Symposium on Advances in Sustainable Polymers 2017 (ASP 2017)
    January 08-11, 2018 Guwahati, India
  • Effect of moisture absorption on degradation of FRP composites laminate and durability of FRP laminates exposed with sea water environment, simulate the moisture absorption using FEA analysis
    Fourth International Symposium on Advances in Sustainable Polymers 2017 (ASP 2017)
    January 08-11, 2018 Guwahati, India
  • Depressurization induced morphology control in microcellular batch foaming process
    Fourth International Symposium on Advances in Sustainable Polymers 2017 (ASP 2017)
    January 08-11, 2018 Guwahati, India
  • Characteristic study of adding ZnO nanoparticles in PVDF and PVDF-TrFE films and their voltage responses
    Fourth International Symposium on Advances in Sustainable Polymers 2017 (ASP 2017)
    January 08-11, 2018 Guwahati, India
  • Advances in pharmaceutical and therapeutic applications of functional cellulose-based membranes for diabetic wound healing
    Fourth International Symposium on Advances in Sustainable Polymers 2017 (ASP 2017)
    January 08-11, 2018 Guwahati, India
  • Indigenous development of hemodialysis hollow fiber membrane
    Versatility of Chemical Engineering to Meet Societal Challenges (CHEMCON 2017),
    December 27-30, 2017
  • Freestanding biopolymer electrode for supercapacitors
    Versatility of Chemical Engineering to Meet Societal Challenges (CHEMCON 2017),
    December 27-30, 2017
  • Plastics Generated from Waste Electrical and Electronics Equipments (WEEE): Prospective for Developing Value Added Products
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Strain Sensing Polymers: A Viable Route for Developing Electronic Skin
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Acid phosphate doped poly(2,5-benzimidazole) - cyanoferrate hybrid composite membranes for HT-PEMFC
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • A consequence of MWCNTs and GO hybridization on random and electrically aligned mixed matrix membrane for selective separation of O2/N2 gas pair
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Effect of nanofillers on modification of piezoelectric properties of vinylidene polymer
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Modelling and simulation of polymeric foam in thermoforming process
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Preparation of polypyrrole/graphene derivative composite for energy conversion applications
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Development of conducting polymer/engineered nanomaterial – hybrid nano-composite for cholesterol biosensor
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Physico-chemical, thermal and mechanical properties of recycled PVC recovered from waste electrical and electronic equipments (WEEE)
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Analysis of mechanical and thermal properties of BFR (brominated flame retardant) plastics and their blends recovered from waste electrical and electronic equipments
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Development of high performance thermal conductive epoxy composite for thermal interface materials (TIMs) application
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Synthesis and characterization of functional copolymers for membrane preparation
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Preparation and characterization of epoxy based nanocomposite adhesives: Evaluation of adhesive strength, thermal & electrical conductivity and morphological properties
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Polydimethylsiloxane- epoxy blends for protective polymeric marine coatings
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Influence of Nitrogen, boron doped graphene /Nickel cobalt oxide /polyaniline hybrid nanostructure Platinum free counter electrode for Dye sensitized solar cell application
    International Conference on Advances in Polymer Science & Technology (APA 2017)
    November 23-25, 2017
  • Surface Modification of Commercial RO/NF Membranes for Improving properties: Recent Advances and Future Prospectives
    International Conference on Membrane Technology And Its Applications
    NIT Tiruchirappalli, Tamil Nadu, February 21 - 23, 2017
  • Techniques of probing the thickness of polyamide layer of thin film composite reverse osmosis membrane
    International Conference on Membrane Technology And Its Applications
    NIT Tiruchirappalli, Tamil Nadu, February 21 - 23, 2017
  • Polyolefin Non-woven Fabric for Fuel Cell and Battery Membrane Separator: Chemical Modification and Characterization
    International Conference on Membrane Technology And Its Applications
    NIT Tiruchirappalli, Tamil Nadu, February 21 - 23, 2017
  • Preparation of poly(vinyl chloride) (PVC) / poly(methyl methacrylate) (PMMA) recycled blends: Effects of varied concentration of PVC and PMMA in stability of PVC phase on the recycled blend
    International Conference on Recent Advancements in Material Chemistry (ICRMS 2017)
    SRM University, Chennai, India, February 15 - 17, 2017
  • Hydrothermaly synthesized rGO and rGO / TiO2 nanostructure for dye sensitized solar cell application
    International Conference on Recent Advancements in Material Chemistry (ICRMS 2017)
    SRM University, Chennai, India, February 15 - 17, 2017
  • Biosynthesis & Characterization of Silver Nanoparticle Using Peanut Leaves Extract and Study of its Antimicrobial Activity
    International Conference on Advancements in Polymeric Materials (APM 2017)
    IISc Bengaluru, India, February 11 – 13, 2017
  • Preparation and characterization of recycled blends using PVC and PMMA recovered from computer waste stream
    International Conference on Advancements in Polymeric Materials (APM 2017)
    IISc Bengaluru, India, February 11 – 13, 2017
  • Oxygen permeability behaviour of polysulfone / nanosilica mixed matrix membranes
    International Conference on Advancements in Polymeric Materials (APM 2017)
    IISc Bengaluru, India, February 11 – 13, 2017
  • Preparation and characterization of PANI based counter electrode for DSSC applications
    International Conference on Advancements in Polymeric Materials (APM 2017)
    IISc Bengaluru, India, February 11 – 13, 2017
  • Evaluation of effect of embedded nanomaterials within ABPBI matrix for fuel cell application
    International Conference on Advancements in Polymeric Materials (APM 2017)
    IISc Bengaluru, India, February 11 – 13, 2017
  • Physico-chemical, thermal and mechanical properties of recycled PVC recovered from waste electrical and electronic equipments (WEEE)
    International Conference on Advancements in Polymeric Materials (APM 2017)
    IISc Bengaluru, India, February 11 – 13, 2017
  • PVDF water purification membrane
    International Conference on Advancements in Polymeric Materials (APM 2017)
    IISc Bengaluru, India, February 11 – 13, 2017
  • Analysis of mechanical and thermal properties of BFR (brominated flame retardant) plastics and their blends recovered from waste electrical and electronic equipments
    International Conference on Advancements in Polymeric Materials (APM 2017)
    IISc Bengaluru, India, February 11 – 13, 2017
  • Tuning of bandgap(emission wavelength) of poly[2-methoxy-5-(2’-ethylhexyloxy)-p-phenylenevinylene](meh-ppv) by dispersing zinc oxide (zno) nanoparticles
    International Conference on Advancements in Polymeric Materials (APM 2017)
    IISc Bengaluru, India, February 11 – 13, 2017
  • Development of PDMS and PU based coating for foul release applications
    International Conference on Advancements in Polymeric Materials (APM 2017)
    IISc Bengaluru, India, February 11 – 13, 2017
  • Development of Conductive Epoxy Adhesives for Thermal Sensor Interconnection
    International Conference on Advancements in Polymeric Materials (APM 2017)
    IISc Bengaluru, India, February 11 – 13, 2017
  • Synthesis and characterisation of polyimides for aerospace applications
    International Conference on Advancements in Polymeric Materials (APM 2017)
    IISc Bengaluru, India, February 11 – 13, 2017
  • Carbon nano-material/polymer composite electrolytes for DSSC applications
    Second International Conference on Solar Energy of Photovoltaic application (ICSEP-2016)
    Bhubaneswar, India, December 17-19, 2016
  • Synthesis and characterization of Tio2/Zno nanostructure for photovoltaic application
    Second International Conference on Solar Energy of Photovoltaic application (ICSEP-2016)
    Bhubaneswar, India, December 17-19, 2016
  • Development of PU and PDMS based coating for foul release applications
    International Interdisciplinary Conference on Humanitarian Technology (IICHT-2016)
    Bhubaneswar, India, December 15-17, 2016
  • Preparation and characterization of PANI based counter electrode for DSSC application
    International Interdisciplinary Conference on Humanitarian Technology (IICHT-2016)
    Bhubaneswar, India, December 15-17, 2016
  • Development of conductive epoxy adhesive for thermal sensor interconnection
    International Interdisciplinary Conference on Humanitarian Technology (IICHT-2016)
    Bhubaneswar, India, December 15-17, 2016
  • Volume shrinkage characteristics of polyester polyol based transparent poly (urethane) poly (methylmethacrylate) interpenetrating polymer network
    Int. Conf. Role of Microscopy and Allied techniques in the development of Multifunctional Nanomaterials (ICMAMN-2016)
    Balasore, India, November 25-27, 2016
  • Bio-degradation and weathering studies of nanosilica reinforced polyurethane nanocomposite based on castor oil and palm oil isocyanate
    Int. Conf. Role of Microscopy and Allied techniques in the development of Multifunctional Nanomaterials (ICMAMN-2016)
    Balasore, India, November 25-27, 2016
  • Synthesis and properties evaluation of coatings derived from waterborne epoxy acryl ate and a biobased cross linker
    Int. Conf. Role of Microscopy and Allied techniques in the development of Multifunctional Nanomaterials (ICMAMN-2016)
    Balasore, India, November 25-27, 2016
  • Effect of rubber based compatibilizer on mechanical, thermal properties of PMMA/PVC recycled blend
    Int. Conf. Role of Microscopy and Allied techniques in the development of Multifunctional Nanomaterials (ICMAMN-2016)
    Balasore, India, November 25-27, 2016
  • Purified water: Not a requirement but a necessity
    National conf. on Environmental impact assessment and human health: Perspectives, approaches and future direction (EIAHH-2016)
    Cuttack, India, September 28-29, 2016
  • Novel blends of poly(lactic acid) with epoxidized soybean oil modified thermoplastic starch
    Int. Conf. Advancements in Polymeric Materials (APM-2016)
    Ahmedabad, India, February 12-14, 2016
  • Structural, thermal, morphological and mechanical investigation of vegetable oil based polyurethane silica Nanocomposite
    Int. Conf. Advancements in Polymeric Materials (APM-2016)
    Ahmedabad, India, February 12-14, 2016
  • Thermo mechanical characterization of PVC, PMMA recovered from computer waste
    Int. Conf. Advancements in Polymeric Materials (APM-2016)
    Ahmedabad, India, February 12-14, 2016
  • High performance waterborne Epoxy based thermoset from epoxidized soybean oil
    Int. Conf. Advancements in Polymeric Materials (APM-2016)
    Ahmedabad, India, February 12-14, 2016
  • An alternative to PVC in Medical and Pharmaceutical Packaging Applications
    Int. Conf. Advancements in Polymeric Materials (APM-2016)
    Ahmedabad, India, February 12-14, 2016
  • Comparative study of mechanical and morphological properties of pristine polyimide and polyimide-nanoclay composite
    Int. Conf. Advancements in Polymeric Materials (APM-2016)
    Ahmedabad, India, February 12-14, 2016
  • Mechanical and Morphological Properties of Anhydride-Cured Epoxy Resins and its Bio-Based Blends
    Int. Conf. Advancements in Polymeric Materials (APM-2016)
    Ahmedabad, India, February 12-14, 2016
  • Polyurethane as a shape memory polymer: novel trends
    Int. Conf. Advancements in Polymeric Materials (APM-2016)
    Ahmedabad, India, February 12-14, 2016
  • Synthesis and characterization of biobased epoxy blends from epoxidized castor oil
    Int. Conf. Advancements in Polymeric Materials (APM-2016)
    Ahmedabad, India, February 12-14, 2016
  • Influence of cloisite 30B nanoparticles in the properties of castor oil based polyurethane/epoxy nanocomposites
    Int. Conf. Advancements in Polymeric Materials (APM-2016)
    Ahmedabad, India, February 12-14, 2016
  • New Blend from Synthesized Maleated Soy Polyol/Epoxy Resin and their Characterisation
    Int. Conf. Advancements in Polymeric Materials (APM-2016)
    Ahmedabad, India, February 12-14, 2016
  • Polymer/carbon nanotube hybrid electrolytes for high efficient solid state dye sensitized solar cells.
    Int. Conf. Nanostructured Polymeric Materials and Polymer Nanocomposites (ICNPM-2015)
    Kerala, India, November 13-15, 2015
  • Synthesis and characterization of polymeric partially HDI based polyurethane adhesive using castor oil based polyol
    Int. Conf. Advancements in Polymeric Science and Technology (APA-2015)
    Rajkot, India, October 29-31, 2015
  • Preparation of Ag Decorated MWCNTs Impregnated with Epoxy Resin
    Int. Conf. Advancements in Polymeric Science and Technology (APA-2015)
    Rajkot, India, October 29-31, 2015
  • Properties of Transparent poly (urethane-methacrylate)s acquire by the polyols moieties
    Int. Conf. Advancements in Polymeric Science and Technology (APA-2015)
    Rajkot, India, October 29-31, 2015
  • The role of Cloisite 30B nanoparticles in the improvement of the thermal and mechanical properties of biobased polyurethanes
    Int. Conf. Advancements in Polymeric Science and Technology (APA-2015)
    Rajkot, India, October 29-31, 2015
  • Fabrication of PVP/Chitosan Blend Fibers as Surgical Sutures with Enhanced Antimicrobial Activity
    Int. Conf. Advancements in Polymeric Science and Technology (APA-2015)
    Rajkot, India, October 29-31, 2015
  • Preparation and characterization of high performance epoxy based adhesive
    Int. Conf. Advancements in Polymeric Science and Technology (APA-2015)
    Rajkot, India, October 29-31, 2015
  • Synthesis of maleated soy polyol from soybean oil and characterization
    Int. Conf. Advancements in Polymeric Science and Technology (APA-2015)
    Rajkot, India, October 29-31, 2015
  • Effect of mixing PMMA as a second polymer component with soybean oil based PU and PAN interpenetrating polymer network (IPN): A comparative study
    Int. Conf. Advancements in Polymeric Science and Technology (APA-2015)
    Rajkot, India, October 29-31, 2015
  • Synthesis and Optimization of Biobased Epoxy/clay nanocomposites
    Int. Conf. Advancements in Polymeric Science and Technology (APA-2015)
    Rajkot, India, October 29-31, 2015
  • Synthesis and characterization of bio-based epoxy resins from itaconic acids and comparative study with commercialized DGEBA epoxy resin
    Int. Conf. Advancements in Polymeric Science and Technology (APA-2015)
    Rajkot, India, October 29-31, 2015
  • High Performance Coating Derived from Biobased Waterborne Epoxy and Cross-linking Agent
    Int. Conf. Advancements in Polymeric Science and Technology (APA-2015)
    Rajkot, India, October 29-31, 2015
  • Effect of incorporation of organically modified montmorillonite clay and sisal fibers on Epoxidized castor oil touhghened diglycidyl ether of bisphenol A network
    Second International Conference on Composites, Biocomposites and nanocomposites (ICCBN-2015)
    Durban, South Africa, October 28-30, 2015
  • Biocomposites from recycled polypropylene and cellulosic fibers
    Second International Conference on Composites, Biocomposites and nanocomposites (ICCBN-2015)
    Durban, South Africa, October 28-30, 2015
  • Influence of Addition of Vapor Grown Carbon Fiber on Mechanical and Thermal Properties of LNP filled Bio-Poly (trimethylene terephthalate) hybrid Nanocomposites
    Second International Conference on Composites, Biocomposites and nanocomposites (ICCBN-2015)
    Durban, South Africa, October 28-30, 2015
  • Sisal fiber reinforced recycled polypropylene (rPP) Biocomposites: Characterization of mechanical, thermal and morphological properties
    Second International Conference on Composites, Biocomposites and nanocomposites (ICCBN-2015)
    Durban, South Africa, October 28-30, 2015
  • Evaluation of Recyclability of Waste Mobile Phone Plastics
    Second International Conference on Composites, Biocomposites and nanocomposites (ICCBN-2015)
    Durban, South Africa, October 28-30, 2015
  • Synthesis and characterization of biobased polyurethanes from modified castor oil and palm oil based isocyanate: Effect of NCO/OH molar ratio
    Int. Conf. Advances in Applied Science and Environmental Technology, ASET Bangkok
    Thailand, August 28-29, 2015
  • Synthesis and Optimization of Epoxidized Castor Oil in the Presence of a Sulphonated Polystyrene Type Cation Exchange Resin Catalyst
    Int. Conf. Advances in Applied Science and Environmental Technology, ASET Bangkok
    Thailand, August 28-29, 2015
  • Biobased Polyurethane derived from trans-esterified castor oil: synthesis and characterization
    XIII International Conference on Polymers and Advanced Materials (ICPAM 2015)
    Singapore, January 8 - 9, 2015
  • Effect of catalyst on castor oil based polyurethane with different hard/soft segment ratio
    XIII International Conference on Polymers and Advanced Materials (ICPAM 2015)
    Singapore, January 8 - 9, 2015
  • Kinetic study of the esterification of phthalic anhydride with 1.4 butanediol tetrabutyl orthotitanate as a catalyst
    International Symposium on Polymers Science and Technology (MACRO- 2015)
    Kolkata, January 23- 26, 2015
  • Study of aging properties of polyurethane adhesive on different substrate in different medium based on aliphatic isocynate
    International Symposium on Polymers Science and Technology (MACRO- 2015)
    Kolkata, January 23- 26, 2015
  • Chemical modification of thermoplastic starch by reaction with MDI
    International Symposium on Polymers Science and Technology (MACRO- 2015)
    Kolkata, January 23- 26, 2015
  • Synthesis of Inter penetrating polymer network (IPN) from epoxidized soybean oil (ESO) based polyurethane (PU)
    International Symposium on Polymers Science and Technology (MACRO- 2015)
    Kolkata, January 23- 26, 2015
  • Effect of reprocessing and accelerated aging on a WEEE derived engineering thermoplastic blends
    Emerging Trends in Elastomeric Materials, Process and Tyre Technology for Sustainable Growth (IRMRA’s 22nd Rubber Conference)
    Delhi, India, November 21-22, 2014
  • Effect of water absorption on the mechanical and physical properties of banana fiber and nanoclay reinforced poly (lactic acid) hybrid green nanocomposites
    Int. Conf. Polymeric Biomaterials, Bioengineering & Biodiagnostics (Biomaterials-2014)
    Delhi, India, October 27-30, 2014
  • Preparation and optimization of epoxidation of castor oil with glacial acetic acid in presence of a sulphonated polystyrene type cation exchange resin
    Int. Conf. Polymeric Biomaterials, Bioengineering & Biodiagnostics (Biomaterials-2014)
    Delhi, India, October 27-30, 2014
  • Synthesis and characterization of biobased polyurethane using castor oil, 1,4 butane diaol and aliphatic isocynate
    Int. Conf. Polymeric Biomaterials, Bioengineering & Biodiagnostics (Biomaterials-2014)
    Delhi, India, October 27-30, 2014
  • Mechanical and thermal properties of biobased epoxy from renewable resource based epoxidized soyabean oil cured with anhydride crosslinker
    Int. Conf. Polymeric Biomaterials, Bioengineering & Biodiagnostics (Biomaterials-2014)
    Delhi, India, October 27-30, 2014
  • Mechanical, thermal and morphological behavior of cellulose microfibril reinforced Biocomposite
    Int. Conf. Polymeric Biomaterials, Bioengineering & Biodiagnostics (Biomaterials-2014)
    Delhi, India, October 27-30, 2014
  • Synthesis of biobased Polyurethane from castor Oil: Study of thermal, morphological, mechanical and chemical properties
    Third International Conference on Polymer Processing and Characterization (ICPPC-2014)
    Kerala, India, October 11 – 13, 2014
  • Study of Durability and ageing properties of PU- adhesives on aluminium substrate in different medium
    Third International Conference on Polymer Processing and Characterization (ICPPC-2014)
    Kerala, India, October 11 – 13, 2014
  • Effect of catalyst and NCO/OH ratio on castor oil based polyurethane adhesive
    Third International Conference on Polymer Processing and Characterization (ICPPC-2014)
    Kerala, India, October 11 – 13, 2014
  • Preparation and characterization of renewable resources based waterborne epoxy coating
    Third International Conference on Polymer Processing and Characterization (ICPPC-2014)
    Kerala, India, October 11 – 13, 2014
  • Gas phase synthesis of carbon nanotubes (CNTS) by radio frequency plasma enhanced chemical vapour deposition (RF-PECVD) method
    Int. Conf. Harnessing Engineering, Technology, and Innovation for Sustainable Growth (HETIS-2014)
    Chandigarh, September 19 – 20, 2014
  • Degradation behaviour of natural fiber based polypropylene: Composites and nanocomposites
    Int. Conf. Harnessing Engineering, Technology, and Innovation for Sustainable Growth (HETIS-2014)
    Chandigarh, September 19 – 20, 2014
  • Investigation on effect of NCO/OH ratio on structure & material properties of polyurethane from castor oil based on biobased isocyanate and commercial based isocyanate
    Int. Conf. Harnessing Engineering, Technology, and Innovation for Sustainable Growth (HETIS-2014)
    Chandigarh, September 19 – 20, 2014
  • Preparation and characterization of renewable resource based waterborne epoxy coating
    Int. Conf. Harnessing Engineering, Technology, and Innovation for Sustainable Growth (HETIS-2014)
    Chandigarh, September 19 – 20, 2014
  • A systematic investigation on lignin nanoparticles (LNPs) reinforced bio-poly (trimethylene terephthalate) (BIO-PTT) green nanocomposites
    Int. Conf. Harnessing Engineering, Technology, and Innovation for Sustainable Growth (HETIS-2014)
    Chandigarh, September 19 – 20, 2014
  • Synthesis and Characterization of Bio-Based Polyurethane from Castor Oil
    Int. Conf. Advancements in Polymeric Materials, APM 2014, LARPM CIPET
    Bhubaneswar, February 14 - 16, 2014
  • Polymer Electrolyte Membranes Based on Functionalized Montmorillonite and Sulfonated Polysulfone for Fuel Cell Applications
    Int. Conf. Advancements in Polymeric Materials, APM 2014, LARPM CIPET
    Bhubaneswar, February 14 - 16, 2014
  • Synthesis of EVA-g-MAH and its compatibilization effect on mechanical, morphological and rheological properties of recycled PC/ABS and virgin PC
    Int. Conf. Advancements in Polymeric Materials, APM 2014, LARPM CIPET
    Bhubaneswar, February 14 - 16, 2014
  • Development and Characterization of Bio-Based Epoxy Composite Derived from Renewable Resource based Epoxidized Soybean Oil and Sisal Fibers
    Int. Conf. Advancements in Polymeric Materials, APM 2014, LARPM CIPET
    Bhubaneswar, February 14 - 16, 2014
  • Influence of Surface modified TiO2 Nanoparticles on Electrochemical Properties of Plasticized PVDF-HFP Composite Electrolytes
    Int. Conf. Advancements in Polymeric Materials, APM 2014, LARPM CIPET
    Bhubaneswar, February 14 - 16, 2014
  • The novel approach: Preparation and characterization of the chitosan based organically modified layred silicate nanocomposites with improved ionic conductivity and tensile modulus
    Int. Conf. Advancements in Polymeric Materials, APM 2014, LARPM CIPET
    Bhubaneswar, February 14 - 16, 2014
  • Systematic investigation of lignin nanoparticles (LNPS) reinforced bio-poly (trimethylene terephthalate) (Bio-PTT)
    Int. Conf. Advancements in Polymeric Materials, APM 2014, LARPM CIPET
    Bhubaneswar, February 14 - 16, 2014
  • Development of biocomposite from recycled polypropylene used in car bumpers: Evaluation of mechanical, thermal and morphological properties
    Int. Conf. Advancements in Polymeric Materials, APM 2014, LARPM CIPET
    Bhubaneswar, February 14 - 16, 2014
  • Solvent effects on the microstructure and properties of poly (D, L lactic acid) scaffolds for tissue engineering using the (SCPL) method
    Asian Workshop on Polymer Processing, AWPP 2013
    Goa, December 8 – 11, 2013
  • Synthesis of Cellulose Microfibrils from Sisal Fibre
    Asian Workshop on Polymer Processing, AWPP 2013
    Goa, December 8 – 11, 2013
  • Polylactic acid/ Banana fiber/ Nanoclay Bio Nanocomposites: Mechanical, Thermal and Morphological Characterization
    Asian Workshop on Polymer Processing, AWPP 2013
    Goa, December 8 – 11, 2013
  • Polypropylene/Modified Layered Silicates Nanocomposites: Assessment of Dynamic Mechanical, Rheological and Flammability Characteristics
    Int. Conf. Nanomaterials: Science, Technology and Applications (ICNM’ 13)
    BS Abdur Rahman University, December 5 – 7, 2013
  • Mechanical, Morphological and Rheological Properties of PP/ABS Blends: Effect of Compatibilizers
    Polymer Processing Society Asia / Australia Conference (PPS – 2013)
    Mumbai, December 4-7, 2013
  • Recycling of Engineering Plastics from WEEE: Influence of Virgin Polycarbonate (PC) and Impact Modifier on the Final Performance of blends
    Polymer Processing Society Asia / Australia Conference (PPS – 2013)
    Mumbai, December 4-7, 2013
  • Polypropylene Nanocomposites Reinforced with Organically and Thermally Modified Layered Silicates: Assessment of Properties
    Polymer Processing Society Asia / Australia Conference (PPS – 2013)
    Mumbai, December 4-7, 2013
  • Development of Bio Composite from Recycled Polypropylene Used Car in Bumper: Evaluation of Mechanical & Thermal Properties
    Polymer Processing Society Asia / Australia Conference (PPS – 2013)
    Mumbai, December 4-7, 2013
  • Systematic investigation of lignin nanoparticles (LNPs) reinforced bio-poly (trimethylene terephthalate) (Bio-PTT) green nanocomposites
    Polymer Processing Society Asia / Australia Conference (PPS – 2013)
    Mumbai, December 4-7, 2013
  • Influence of Surface modified TiO2 Nanoparticles on PEO Composite Electrolytes for Solid State Dye Sensitized Solar Cell Application
    Polymer Processing Society Asia / Australia Conference (PPS – 2013)
    Mumbai, December 4-7, 2013
  • Mechanical, Thermal and Morphological Characterization of Polylactic acid/ Banana fiber/ Nanoclay Bio Nanocomposites
    Int. Conf. Advanced Polymeric Materials, MG University
    Kottayam, October 25 – 27, 2013
  • Cellulose Microfibrils Synthesis From Sisal Fibre
    Int. Conf. Advanced Polymeric Materials, MG University
    Kottayam, October 25 – 27, 2013
  • Effect of layered silicate based nucleating agents on Thermal characteristics of renewable resource based polylactic acid nanocomposites
    MFMS 2013, Bangkok
    Thailand, July 14 – 17, 2013
  • Synthesis and characterization of soyabean oil based epoxy biocomposite
    MFMS 2013, Bangkok
    Thailand, July 14 – 17, 2013
  • Polypropylene Nanocomposites: Combined Effect of Multiwalled Carbon Nanotube and Layered Silicate
    MFMS 2013, Bangkok
    Thailand, July 14 – 17, 2013
  • Mechanical and thermal properties of sisal fiber reinforced Epoxy/unsaturated polyester blend composites
    MFMS 2013, Bangkok
    Thailand, July 14 – 17, 2013
  • Fabrication and Characterization of Sisal Microfibrils/PLA Biocomposites
    Int. Conf. APA-2013
    Chandigarh, February 21-23, 2013
  • Self-Assembled Block Copolymer/Silver Nanocomposites: Synthesis, Structural Characterization, Antimicrobial Efficiency
    Int. Conf. APA-2013
    Chandigarh, February 21-23, 2013
  • Self-Assembled Block Copolymer/Silver Nanocomposites: Synthesis, Structural Characterization, Antimicrobial Efficiency
    Int. Conf. APA-2013
    Chandigarh, February 21-23, 2013
  • Multi Walled Carbon Nanotubes Reinforced Polysulfone Membranes for Gas Separation
    Int. Conf. APA-2013
    Chandigarh, February 21-23, 2013
  • Preparation of Polyimide/MWNT nanocomposites film: Effect of modified MWCNT onto the thermal and electrical performance
    Int. Conf. APA-2013
    Chandigarh, February 21-23, 2013
  • Thermal Properties and Cold Crystallization Kinetics of Surface Treated Lignocellulosic Natural Fiber Reinforced PLA Nanocomposites
    Int. Conf. ANTEC- 2012
    Mumbai, Dec 6-7, 2012
  • Structural Characterization of α-Nucleated Polypropylene/Clay Nanocomposites: A Combined Effect
    ANTEC- 2012
    Mumbai, Dec 6-7, 2012
  • PLA/PGA Scaffolds Prepared by Solvent Casting/Particulate Leaching (SCPL) to Improve Pore Interconnectivity within Tissue Engineering Scaffolds.
    ANTEC- 2012
    Mumbai, Dec 6-7, 2012
  • Development of Value Added Material from Waste Electrical and Electronic Equipment (WEEE) by Upgrading the Properties
    ANTEC- 2012
    Mumbai, Dec 6-7, 2012
  • Effect of Polycarbonate (PC) and Plasticizer on the Performance Characteristics of Mixed Plastics Obtained from Waste Electrical and Electronic Equipment (WEEE)
    Int. Conf. ICNP-2012, Kottayam
    Kerala, October 26-28, 2012
  • Evaluation of Viability of Sulfonated Polyetheretherketone Membranes for Fuel Cell Application
    ICNP-2012, Kottayam
    Kerala, October 26-28, 2012
  • Rheological, Mechanical, Rheological and Thermal Degradation Studies of Different Epoxy Nanocomposites
    ICNP-2012, Kottayam
    Kerala, October 26-28, 2012
  • Compostability and Specific Microbial Activity Study of Renewable Resource Based PLA Nanocomposites
    ICNP-2012, Kottayam
    Kerala, October 26-28, 2012
  • Evaluation of Electrical and Thermal Properties of Polyimide/Aluminium Nitride Composites and Nanocomposites
    ICNP-2012, Kottayam
    Kerala, October 26-28, 2012
  • Flammability and Degradation behaviour of Lignocellulosic biofibre reinforced Recycled polypropylene composites.
    Third International Multicomponent Polymer Conference (IMPC)
    Kottayam, Kerala, March 23-25, 2012
  • Morphological and Rheological Characterization of MWCNT/Polytrimethylene terephthalate (PTT)/Polycarbonate (PC) Blend Nanocomposites
    Third International Multicomponent Polymer Conference (IMPC)
    Kottayam, Kerala, March 23-25, 2012
  • Polysulfone/ Single Walled Carbon Nanotube (SWNT) Mixed Matrix Membrane for Hydrogen Gas Separation
    Third International Multicomponent Polymer Conference (IMPC)
    Kottayam, Kerala, March 23-25, 2012
  • Preparation and Characterization of Electrically and Thermally Conductive Polymeric Composites
    Third International Multicomponent Polymer Conference (IMPC)
    Kottayam, Kerala, March 23-25, 2012
  • Effect of MWCNT on the Self-Healing Efficiency of Fiber Reinforced Epoxy Composites
    Third International Multicomponent Polymer Conference (IMPC)
    Kottayam, Kerala, March 23-25, 2012
  • Fracture Analysis of Rubber Toughened Blend Nanocomposites
    Third International Multicomponent Polymer Conference (IMPC)
    Kottayam, Kerala, March 23-25, 2012
  • Synthesis and Characterization of Pi/TiO2/SiO2 Hybrid Nanocomposites
    Recent Advances in Polymer Technology, North Maharashtra University
    Jalgaon, March 2-3, 2012.
  • Hydrogen Gas Separation: Polysulfone/ SWNT Mixed Matrix Membrane
    Recent Advances in Polymer Technology, North Maharashtra University
    Jalgaon, March 2-3, 2012.
  • Electrically and Thermally Conductive Polymeric Composites: Preparation and Characterization
    Recent Advances in Polymer Technology, North Maharashtra University
    Jalgaon, March 2-3, 2012.
  • In-situ Polymerization and Characterization of PMMA/TiO2 Nanocomposites: Effect of Surface Functionalized TiO2
    Recent Advances in Polymer Technology, North Maharashtra University
    Jalgaon, March 2-3, 2012.
  • PA/PP/MAPP/GF/Clay Nanocomposites: Mechanical, Morphological Characterization and Residual Stress Analysis
    Recent Advances in Polymer Technology, North Maharashtra University
    Jalgaon, March 2-3, 2012.
  • Proton Conducting Sulfonated Poly(Ether Ether Ketone) & Sulfonated Silica Nanocomposite Membrane for Fuel Cell Application
    APA International Congress on Advances in Human Healthcare Systems, New Delhi
    India, February 20-23, 2012
  • Toughened Blend Nanocomosites of PLA/PHB: Preparation and Characterization
    APA International Congress on Advances in Human Healthcare Systems, New Delhi
    India, February 20-23, 2012
  • Synthesis and Characterization of In-Situ Polymerized PMMA/TiO2 Nanocomposites
    APA International Congress on Advances in Human Healthcare Systems, New Delhi
    India, February 20-23, 2012
  • Renewable resource based Polymer nanocomposites: Processing and Characterization of Poly Lactic Acid / Layered Silicate nanoclays
    APM-2012, Advancements in Polymeric Materials, February 10-12, 2012
    Ahmedabad, Gujarat
  • Thermomechanical Characterization Of PLA Nanocomposite Reinforced With HDTMA-MLS Modified MMT
    APM-2012, Advancements in Polymeric Materials, February 10-12, 2012
    Ahmedabad, Gujarat
  • Effects of Process Parameters on Material Removal Rate in Wire EDM Machining for EN-31 Mould and Die steel
    APM-2012, Advancements in Polymeric Materials, February 10-12, 2012
    Ahmedabad, Gujarat
  • Synthesis, characterization and mechanical properties of cross- linked poly sodium acrylate hydrogels with and without cellulose microfibrils and their water state studies
    ICNC 2011, First International Conference on Composites & Nanocomposites
    Jan 7-9, 2011
  • A Study of Toughening Behaviour and Effect of Strain Rate with Temperature on PC/TPU Blend Nanocomposites
    ICNC 2011, First International Conference on Composites & Nanocomposites
    Jan 7-9, 2011
  • Effect of surface treatments of banana fiber on mechanical, thermal and biodegradability properties of PLA/Banana Fiber composites.
    ICNC 2011, First International Conference on Composites & Nanocomposites
    Jan 7-9, 2011
  • Effect of chemical composition of clay on thermal properties of PMMA nanocomposites and evaluation of thermal kinetics
    ICNC 2011, First International Conference on Composites & Nanocomposites
    Jan 7-9, 2011
  • Effect of organically modified clay on the dynamic mechanical & thermal properties of PLA nanocomposites
    APM 2011, Innovations in Material & Product Development
    March 25-27, 2011
  • Preparation and characterization of piezoresistive polyimide / MWCNT nanocomposite for pressure sensor applications
    APM 2011, Innovations in Material & Product Development
    March 25-27, 2011
  • Thermomechanical characterization of epoxy and vinyl ester nanocomposites filled with MWCNT.
    APM 2011, Innovations in Material & Product Development
    March 25-27, 2011
  • Polyamide 66/maleated ethylene octane-co-polymer nanocomposites: investigation of mechanical, thermal and morphological characteristics
    APM 2011, Innovations in Material & Product Development
    March 25-27, 2011
  • Water state and mechanical characterization of cross- linked poly sodium acrylate hydrogels with and without cellulose microfibrils.
    APM 2011, Innovations in Material & Product Development
    March 25-27, 2011
  • Polymeric Hydrogels: Recovery of Metal Components
    Jadavpur University
    December 25-27, 2011, West Bengal
  • Flammability and Degradation behaviour of Recycled Polypropylene/ Lignocellulosic Biofiber Composites
    Jadavpur University
    December 25-27, 2011, West Bengal
  • Recycled Acrylonitrile-Butadiene-Styrene/Polycarbonate Blends from E-Waste: Morphological, Mechanical and Thermal Property analysis
    Jadavpur University
    December 25-27, 2011, West Bengal
  • ABS/Flyash Composites: Mechanical, Thermal & Viscoelastic Properties
    MACRO, 2010 Frontiers of Polymers & Advanced Materials
    Dec 15-17, 2010
  • Swelling & Diffusion Characteristics of Polysodium Acrylic Hydrogels
    MACRO, 2010 Frontiers of Polymers & Advanced Materials
    Dec 15-17, 2010
  • Effect of Nanosilica on the Thermal Stability & Flammability of PC nanocomposites
    MACRO, 2010 Frontiers of Polymers & Advanced Materials
    Dec 15-17, 2010
  • Effect of sulfonation on Proton conducting Polysulfone/SiO2 Nanocomposite membranes
    MACRO, 2010 Frontiers of Polymers & Advanced Materials
    Dec 15-17, 2010
  • Effect of chemical composition of nanofillers on flammability of PMMA nanocomposites and evaluation of thermal kinetics
    PSE, Polymer Science & Engineering: Emerging Dimensions
    Nov 26-27, 2010
  • Effect of Surface Modification of Nanosilica on the Properties of PC/Nanosilica Nanocomposites
    PSE, Polymer Science & Engineering: Emerging Dimensions
    Nov 26-27, 2010
  • Effect of Surface Treatments on Viscoelastic, Mechanical and Thermal Properties of ABS Reinforced Fly Ash Composites
    PSE, Polymer Science & Engineering: Emerging Dimensions
    Nov 26-27, 2010
  • Proton Conducting Sulfonated PSU/TiO2 Nanocomposite Membrane for Fuel Cell Applications
    PSE, Polymer Science & Engineering: Emerging Dimensions
    Nov 26-27, 2010
  • Influence of nanoclays and nano-TiO2 on the Mechanical and Thermal Properties of Polycarbonate Nanocomposites
    Advances in Polymer Technology (apt-10)
    Kochi, Kerala, February 26-27, 2010
  • PLA/PP Biodegradable Blends: Evaluation of Mechanical, Thermal and Morphological Characteristics
    Advances in Polymer Technology (apt-10)
    Kochi, Kerala, February 26-27, 2010
  • Impact Modification of PTT/PP Blends: Fabrication and Characterization
    APM 2010, Advancements in Polymeric Materials
    Bhubaneswar, February 20-22, 2010
  • Property evaluation of PP/HIPS blend nanocomposites obtained from postconsumer E-waste
    APM 2010, Advancements in Polymeric Materials
    Bhubaneswar, February 20-22, 2010
  • Mechanical and fracture behavior of banana fiber reinforced PLA biocomposites
    APM 2010, Advancements in Polymeric Materials
    Bhubaneswar, February 20-22, 2010
  • Biodegradable PLA/PBAT blend nanocomposites: Effect of Glycidyl Methacrylate (GMA) on the Thermal, Mechanical and Morphological Properties
    APM 2010, Advancements in Polymeric Materials
    Bhubaneswar, February 20-22, 2010
  • Evaluation of Mechanical, Thermal, Morphological behaviour of PLA Biocomposites
    97th Indian Science Congress
    January, 3-7, 2010, Thiruvananthapuram
  • PLA/PBAT Blend Nanocomposites: Effect of Glycidyl Methacrylate on the properties
    97th Indian Science Congress
    January, 3-7, 2010, Thiruvananthapuram
  • Polypropylene Nanocomposites: Effect of incorporation of photo-initiator on the performance characteristics
    97th Indian Science Congress
    January, 3-7, 2010, Thiruvananthapuram
  • Biodegradable PLA/PBAT blend nanocomposites: Effect of Glycidyl Methacrylate (GMA) on the Thermal, Mechanical and Morphological Properties
    Asian Polymer Association (APA)-2009
    Dec. 17-20, 2009, New Delhi
  • Morphological and Physico Mechanical Properties of TPU Nanocomposites: Effect of organoclay structure
    Asian Polymer Association (APA)-2009
    Dec. 17-20, 2009, New Delhi
  • Morphology, Mechanical and Thermal Properties of PP/HIPS Blends nanocomposite obtained from E-waste
    Asian Polymer Association (APA)-2009
    Dec. 17-20, 2009, New Delhi
  • Poly (trimethylene terephthalate) Nanocomposite: Effect of Organoclays on the properties
    Asian Polymer Association (APA)-2009
    Dec. 17-20, 2009, New Delhi
  • Mechanical, thermal, morphological and conductivity properties of Polysulfone-clay nanocomposites
    Asian Polymer Association (APA)-2009
    Dec. 17-20, 2009, New Delhi
  • Mechanical, Thermal & Morphological behavior of PA 6/GF/clay hybrid nanocomposites
    Recent Advances in Polymer Technology (RAPT)- 2009
    Dec 28-29, 2009, Jalgaon
  • Characterization of Organically Modified Clay and Clay- Filled PTT/PP blend nanocomposites
    Recent Advances in Polymer Technology (RAPT)- 2009
    Dec 28-29, 2009, Jalgaon
  • Nanocomposites based on PP/MWCNT: Morphological Characterization & Mechanical performance
    Recent Advances in Polymer Technology (RAPT)- 2009
    Dec 28-29, 2009, Jalgaon
  • Physico-mechanical & morphological characterization of PLA/PP biodegradable blends
    Recent Advances in Polymer Technology (RAPT)- 2009
    Dec 28-29, 2009, Jalgaon
  • Morphological, Thermal & Physico-mechanical; properties of TPU/SAN blends and its blend nanocomposites
    Recent Advances in Polymer Technology (RAPT)- 2009
    Dec 28-29, 2009, Jalgaon
  • Hybrid PP Pine Apple Leaf Fiber (PALF) reinforced nanocomposites Evaluation of Mechanical, Thermal & Morphological behaviour
    Polymer Processing Society, PPS-25
    March 1-5, 2009, Goa
  • Characterization of Organically Modified Clay and Clay- Filled PMMA nanocomposites
    Polymer Processing Society, PPS-25
    March 1-5, 2009, Goa
  • Aromatic-aliphatic co-polyester poly (butylene adipate- co- terephthalate) bio-nanocomposite
    Polymer Processing Society, PPS-25
    March 1-5, 2009, Goa
  • Starch based Biodegradable (PBAT) Nanocomposites:Effect of starch modification on Mechanical, Thermal, Morphological and Biodegradability behavior
    International Conference, INDIA RUBBER EXPO 2009
    January 28 -31, 2009, Kolkata
  • Properties of Organically modified Layered Silicates reinforced PMMA Nanocomposites
    International Conference, INDIA RUBBER EXPO 2009
    January 28 -31, 2009, Kolkata
  • Structure Property Relationship of Poly (Trimethylene Terephthalate) PTT/m-LLDPE Blend Nanocomposites
    International Conference, INDIA RUBBER EXPO 2009
    January 28 -31, 2009, Kolkata
  • Preparation and characterization of poly (methylmethacrylate)-clay nanocomposites via melt intercalation: Effect of organoclay on the thermal, mechanical and flammability properties
    National Conference on Nanotechnology and Its Applications
    July 17 – 18, 2009, Dhenkanal, Orissa
  • Impact Modification of PTT/PP Blend Nanocomposites: Fabrication and Characterization
    National Conference on Nanotechnology and Its Applications
    July 17 – 18, 2009, Dhenkanal, Orissa
  • Effect of Nanoclay on Mechanical, Thermal and Morphological Behaviour of Glass fibre Reinforced Polyamide-6 Nanocomposites
    National Conference on Nanotechnology and Its Applications
    July 17 – 18, 2009, Dhenkanal, Orissa
  • Mechanical and Thermal Properties of Polycarbonate Nanocomposites: Effect of various nanoclays and nano TiO2
    National Conference on Nanotechnology and Its Applications
    July 17 – 18, 2009, Dhenkanal, Orissa
  • Photo-oxidative degradation of Polypropylene nanocomposites-Effect of incorporation of additives on performance characteristics
    National Conference on Nanotechnology and Its Applications
    July 17 – 18, 2009, Dhenkanal, Orissa
  • Morphological Property of Biodegradable PLA/PBAT blend and its Nanocomposite
    National Conference on Nanotechnology and Its Applications
    July 17 – 18, 2009, Dhenkanal, Orissa
  • Morphological, Thermal and Physico Mechanical Properties of TPU/SAN Blend and its Blend Nanocomposites
    National Conference on Nanotechnology and Its Applications
    July 17 – 18, 2009, Dhenkanal, Orissa
  • Morphology, Mechanical and Thermal Properties of recycled High Impact Polystyrene/Polypropylene Blends from E-waste
    National Conference on Nanotechnology and Its Applications
    July 17 – 18, 2009, Dhenkanal, Orissa
  • Poly (trimethylene terephthalate) Nanocomposite: Effect of Organoclays on Mechanical, Thermal and Morphological properties
    National Conference on Nanotechnology and Its Applications
    July 17 – 18, 2009, Dhenkanal, Orissa
  • Synthesis and characterization of Polysulfone based nanocomposites: Study on effect of nanoclays on morphology and conductivity
    National Conference on Nanotechnology and Its Applications
    July 17 – 18, 2009, Dhenkanal, Orissa
  • Lignocellulosic PALF reinforced Polypropylene Nanocomposites: Mechanical and Thermal Characterisation
    ICBC 2008, Second International Conference on Polymer Blends, Composites, IPNS, Membranes, Polyelectrolytes & Gels: Macro to Nano Scales
    Sept. 22-24, 2008, MG University, Kottayam
  • Mechanical and Thermal behaviour of PTT/m-LLDPE Blend Nanocomposites
    ICBC 2008, Second International Conference on Polymer Blends, Composites, IPNS, Membranes, Polyelectrolytes & Gels: Macro to Nano Scales
    Sept. 22-24, 2008, MG University, Kottayam
  • Organically modified Biodegradable Poly (butylene adipate-co-terephthalate) (PBAT) nanocomposites
    ICBC 2008, Second International Conference on Polymer Blends, Composites, IPNS, Membranes, Polyelectrolytes & Gels: Macro to Nano Scales
    Sept. 22-24, 2008, MG University, Kottayam
  • PMMA Layered silicate Nanocomposites: Fabrication & Characterization
    ICBC 2008, Second International Conference on Polymer Blends, Composites, IPNS, Membranes, Polyelectrolytes & Gels: Macro to Nano Scales
    Sept. 22-24, 2008, MG University, Kottayam
  • Aromatic-aliphatic co-polyester poly (butylene adipate-co-terephthalate) bio-nanocomposite: Influence of organic modification on structure, and properties
    International Conference on Advances in Polymer Technology (APT-08)
    Sept 25-27, 2008 Cochin University of Science & Technology
  • Effect of Organic Modification on the Compatibilisation efficiency of Poly (Trimethylene Terephthalate) PTT/m-LLDPE Blend Nanocomposites
    International Conference on Advances in Polymer Technology (APT-08)
    Sept 25-27, 2008 Cochin University of Science & Technology
  • Pine Apple Leaf Fiber (PALF) reinforced Polypropylene Nanocomposites
    International Conference on Advances in Polymer Technology (APT-08)
    Sept 25-27, 2008 Cochin University of Science & Technology
  • Intercalated Poly (methyl methacrylate) Layered silicate Nanocomposites: Effect of Organoclay structure
    International Conference on Advances in Polymer Technology (APT-08)
    Sept 25-27, 2008 Cochin University of Science & Technology
  • Preparation & Characterization of Biodegradable & Compatible Ethylene Vinyl Acetate (EVA)/Thermoplastic Starch (TPS) Blend nanocomposites
    World Forum on Advanced Materials (POLY CHAR 16)
    Feb 17-21, 2008, Lucknow, India
  • Compatibilized Polypropylene (PP)/Polyoxymethylene (POM) Clay Nanocomposites
    World Forum on Advanced Materials (POLY CHAR 16)
    Feb 17-21, 2008, Lucknow, India
  • Effect of Hybridization on the Dynamic Mechanical, Thermal & Morpological behaviour of MAPP treated Banana-glass Fiber PP Composites
    World Forum on Advanced Materials (POLY CHAR 16)
    Feb 17-21, 2008, Lucknow, India
  • PBT/ABS Blend layered silicate Nanocomposites: Effect of clay structure on Mechanical performance & Morphology
    World Forum on Advanced Materials (POLY CHAR 16)
    Feb 17-21, 2008, Lucknow, India
  • Biodegradable Nanocomposites from PBAT & Layered silicates
    February, 7 – 9, 2008, at ICERP 2008, Bombay Exhibition Centre, N.S.E Complex
    Goregaon (East), Mumbai
  • Enhancement of Properties of Polypropylene (PP)/-Polyoxymethylene (POM) Clay Nanocomposites
    Advances in Polymer Science & Technology International Conference, POLY-2008)
    January 28-31, 2008, New Delhi
  • Processing and Characterization of Polypropylene/Thermoplastic Starch Blend Nanocomposite
    Advances in Polymer Science & Technology International Conference, POLY-2008)
    January 28-31, 2008, New Delhi
  • Effect of Different Clay Loading on the Mechanical, Thermal and Morphological Properties of Polycarbonate (PC)/ Acrylonitrile-Butadiene-Styrene ABS Blend Nanocomposites.
    Advances in Polymer Science & Technology International Conference, POLY-2008)
    January 28-31, 2008, New Delhi
  • Crystallization Behaviour and Thermal Stability of Poly (trimethylene terephthalate) (PTT)/Poly (ethyleneterephthalate) (PET) Blend Nanocomposites
    Advances in Polymer Science & Technology International Conference, POLY-2008)
    January 28-31, 2008, New Delhi
  • Fabrication and Characterization of High Performance Ethylene vinyl acetate/ Starch Blend Nanocomposite
    Advances in Polymer Science & Technology International Conference, POLY-2008)
    January 28-31, 2008, New Delhi
  • Poly (trimethylene terphthalate) (PTT)/Polystyrene (PS)/Organoclay Nanocomposite: Effect of Clay on Mechanical, Thermal and Morphological Behaviour
    Advances in Polymer Science & Technology International Conference, POLY-2008)
    January 28-31, 2008, New Delhi
  • Morphology and Thermo mechanical Properties of Low Density Polyethylene (LDPE)/Thermoplastic starch (TPS) Blend Nanocomposites.
    Advances in Polymer Science & Technology International Conference, POLY-2008)
    January 28-31, 2008, New Delhi
  • Dynamic Mechanical Properties and Morphology Poly (butylene terephthalate) (PBT) / Acrylonitrile-Butadiene-Styrene (ABS) / Montmorillonite Nanocomposites.
    Advances in Polymer Science & Technology International Conference, POLY-2008)
    January 28-31, 2008, New Delhi
  • Characterization of Biodegradable and Compatible Ethylene vinyl acetate (EVA)/ Thermoplastic Starch (TPS) Blend Nanocomposites
    International Conference on Rubber & Rubber-like –Materials (ICRRM-2008)
    January 8 – 10, 2008, IIT Kharagpur
  • Mechanical Properties and Morphology of PBT/ABS-Clay Nanocomposites
    International Conference on Rubber & Rubber-like –Materials (ICRRM-2008)
    January 8 – 10, 2008, IIT Kharagpur
  • Morphological Analysis and Thermo gravimetric Evaluation of Polycarbonate (PC)/ Acrylonitrile-Butadiene-Styrene (ABS) Blend Nanocomposites.
    International Conference on Rubber & Rubber-like –Materials (ICRRM-2008)
    January 8 – 10, 2008, IIT Kharagpur
  • Biodegradable and functionally superior polypropylene thermoplastic starch nanocomposites from melt blending
    International Conference on Rubber & Rubber-like –Materials (ICRRM-2008)
    January 8 – 10, 2008, IIT Kharagpur
  • Fabrication and Characterization of High Performance Ethylene vinyl acetate/ Starch Blend Nanocomposite
    International & INCCOM-6 Conference on Future Trends in Composite Materials and Processing
    December 12-4, 2007, IIT Kanpur
  • Poly (trimethylene terphthalate) (PTT)/Polystyrene (PS)/Organoclay Nanocomposite: Effect of Clay on Mechanical, Thermal and Morphological Behaviour
    International & INCCOM-6 Conference on Future Trends in Composite Materials and Processing
    December 12-4, 2007, IIT Kanpur
  • Morphology and Thermo mechanical Properties of Low Density Polyethylene (LDPE)/Thermoplastic starch (TPS) Blend Nanocomposites
    International & INCCOM-6 Conference on Future Trends in Composite Materials and Processing
    December 12-4, 2007, IIT Kanpur
  • Dynamic Mechanical Properties and Morphology Poly (butylene terephthalate) (PBT) / Acrylonitrile-Butadiene-Styrene (ABS) / Montmorillonite Nanocomposites
    International & INCCOM-6 Conference on Future Trends in Composite Materials and Processing
    December 12-4, 2007, IIT Kanpur
  • Enhancement of Properties of Polypropylene (PP)/-Polyoxymethylene (POM) Clay Nanocomposites
    International & INCCOM-6 Conference on Future Trends in Composite Materials and Processing
    December 12-4, 2007, IIT Kanpur
  • Processing and Characterization of Polypropylene/Thermoplastic Starch Blend Nanocomposite
    International & INCCOM-6 Conference on Future Trends in Composite Materials and Processing
    December 12-4, 2007, IIT Kanpur
  • Effect of Different Clay Loading on the Mechanical, Thermal and Morphological Properties of Polycarbonate (PC)/ Acrylonitrile-Butadiene-Styrene ABS Blend Nanocomposites
    International & INCCOM-6 Conference on Future Trends in Composite Materials and Processing
    December 12-4, 2007, IIT Kanpur
  • Crystallization Behaviour and Thermal Stability of Poly (trimethylene terephthalate) (PTT)/Poly (ethyleneterephthalate) (PET) Blend Nanocomposites
    International & INCCOM-6 Conference on Future Trends in Composite Materials and Processing
    December 12-4, 2007, IIT Kanpur
  • Effect of Different Clay Loading on the Mechanical, Thermal and Morphological Properties of PC/ABS Blend Nanocomposites
    International Conference on Materials for Advanced Technologies 2007 (ICMAT 2007)
    July -6, 2007, Suntech Singapore International Convention & Exhibition Centre
  • Fabrication and Characterization of High Performance Ethylene vinyl acetate/ Starch Blend Nanocomposite
    International Conference on Materials for Advanced Technologies 2007 (ICMAT 2007)
    July -6, 2007, Suntech Singapore International Convention & Exhibition Centre
  • Flammability behavior of Recycled ABS/PC Blend nanocomposite
    International Conference on Polymeric Materials in Power Engineering (ICPMPE 2007)
    October 4- 6, 2007, CPRI Bangalore
  • Fabrication and Characterization of PBT/ABS Organoclay Nanocomposites
    International Conference on Polymeric Materials in Power Engineering (ICPMPE 2007)
    October 4- 6, 2007, CPRI Bangalore
  • Morphological and Thermal behaviour of PC/ABS Blend Nanocomposites
    International Conference on Polymeric Materials in Power Engineering (ICPMPE 2007)
    October 4- 6, 2007, CPRI Bangalore
  • Effect of Co-treated montmorillonite on Poly (trimethylene terphthalate) (PTT) / Polystyrene (PS) Blend Nanocomposites
    International Conference on Polymeric Materials in Power Engineering (ICPMPE 2007)
    October 4- 6, 2007, CPRI Bangalore
  • Fabrication and Characterization of Biodegradable and Compatible ethylene vinyl acetate (EVA)/ Thermoplastic Starch (TPS) Blend Nanocomposites
    10th International Conference n Advanced Materials (IUMRS-ICAM 2007)
    October 8- 13, 2007, Bangalore
  • Effect of Nanoclay on the Properties of Immiscible PBT/ABS Blend
    10th International Conference n Advanced Materials (IUMRS-ICAM 2007)
    October 8- 13, 2007, Bangalore
  • PC/ABS Blend Nanocomposites: A Critical Study on the Thermal and Morphological Properties
    10th International Conference n Advanced Materials (IUMRS-ICAM 2007)
    October 8- 13, 2007, Bangalore
  • Enhancement of Properties of Polypropylene (PP)/-polyoxymethylene (POM) Clay Nanocomposites
    10th International Conference n Advanced Materials (IUMRS-ICAM 2007)
    October 8- 13, 2007, Bangalore
  • A study on Phase Morphology and Dynamic Mechanical behaviour of PP-EOC / Organoclay Nanocomposites.
    2nd International Conference on Recent Advances in Composite Materials (ICRACM-2007)
    Feb. 20th – 23rd 2007, India Habitat Centre, New Delhi, India
  • Rheological and Morphological Characterization of Organoclay reinforced POM/TPU Nanocomposites
    2nd International Conference on Recent Advances in Composite Materials (ICRACM-2007)
    Feb. 20th – 23rd 2007, India Habitat Centre, New Delhi, India
  • Mechanical and Viscoelastic behaviour of polycarbonate/clay nanocomposites with co-treated Montmorillonite.
    2nd International Conference on Recent Advances in Composite Materials (ICRACM-2007)
    Feb. 20th – 23rd 2007, India Habitat Centre, New Delhi, India
  • Rheological Characterization of Polypropylene Hybrid Composites reinforced with Glass and PALF Fibers: Effect of Coupling Agent on the Morphological and Thermal Behaviour
    2nd International Conference on Recent Advances in Composite Materials (ICRACM-2007)
    Feb. 20th – 23rd 2007, India Habitat Centre, New Delhi, India
  • Dynamic Mechanical Behaviour of MAPP modified Banana – Glass Fiber reinforced Polypropylene Composites
    2nd International Conference on Recent Advances in Composite Materials (ICRACM-2007)
    Feb. 20th – 23rd 2007, India Habitat Centre, New Delhi, India
  • Morphology, Thermal and Mechanical Properties of MAPP treated Bamboo and Glass Fiber reinforced PP Hybrid Composites
    2nd International Conference on Recent Advances in Composite Materials (ICRACM-2007)
    Feb. 20th – 23rd 2007, India Habitat Centre, New Delhi, India
  • Effect of Coupling Agent on the Mechanical, Thermal and Morphological Behaviour of Jute – Glass / PP Hybrid Composites
    2nd International Conference on Recent Advances in Composite Materials (ICRACM-2007)
    Feb. 20th – 23rd 2007, India Habitat Centre, New Delhi, India
  • PP-EOC / Clay Nanocomposites : Mechanical and Rheological Characterization
    Polymers for Advanced Technologies, Macro-2006
    Dec. 17th– 20th 2006, N.C.L, Pune
  • The Effect of Organoclay on the Dynamic Mechanical, Thermal and Morphological Behaviour of POM-TPU blend.
    Polymers for Advanced Technologies, Macro-2006
    Dec. 17th– 20th 2006, N.C.L, Pune
  • Melt blended Polycarbonate / Layered Silicate Nanocomposites : Mechanical, Thermal and Morphological Behaviour.
    Polymers for Advanced Technologies, Macro-2006
    Dec. 17th– 20th 2006, N.C.L, Pune
  • Thermal and Mechanical characterization of MAPP treated Sisal-Glass / PP Hybrid composites with different Morphology
    Polymers for Advanced Technologies, Macro-2006
    Dec. 17th– 20th 2006, N.C.L, Pune
  • Banana – Glass fiber reinforced Polypropylene Hybrid composite – The effect of MAPP on the Dynamic Mechanical and Thermal Property
    Polymers for Advanced Technologies, Macro-2006
    Dec. 17th– 20th 2006, N.C.L, Pune
  • Dynamic Mechanical, Thermal & Morphological Behaviour of MAPP treated Jute – Glass / PP Hybrid composite
    Polymers for Advanced Technologies, Macro-2006
    Dec. 17th– 20th 2006, N.C.L, Pune
  • Effect of Hybridisation on the Thermal, Mechanical properties of MAPP treated Bamboo – Glass / PP composites with different morphology
    Polymers for Advanced Technologies, Macro-2006
    Dec. 17th– 20th 2006, N.C.L, Pune
  • Hybrid Effect on the Dynamic Mechanical, Thermal & Morphological Behaviour of MAPP treated PALF – Glass fiber reinforced
    Polymers for Advanced Technologies, Macro-2006
    Dec. 17th– 20th 2006, N.C.L, Pune
  • Thermal, Morphological and Dynamic Mechanical Characterization of Melt blended PC Nanocomposites
    4th International Conference on Advanced Materials & Processing (ICAMP – 4)
    December 10th – 13th 2006, Hamilton, New Zealand
  • Fabrications and Characterization of Polypropylene / Ethylene – Octene Nanocomposites
    4th International Conference on Advanced Materials & Processing (ICAMP – 4)
    December 10th – 13th 2006, Hamilton, New Zealand
  • Fabrication and Characterization of Sisal / Glass and Polypropylene Hybrid Composites
    4th International Conference on Advanced Materials & Processing (ICAMP – 4)
    December 10th – 13th 2006, Hamilton, New Zealand
  • Rheological Characterization of Jute / HDPE Composites
    4th International Conference on Advanced Materials & Processing (ICAMP – 4)
    December 10th – 13th 2006, Hamilton, New Zealand
  • Fabrication of high Performance Blend Nanocomposites: Dynamic Mechanical, Thermal and Morphological Characterization
    International Conference on Emerging Trends in Polymer Technology 2006 (ETPT-06)
    December 7 – 8th 2006, SPE, India, Hotel Leela Kempnski, Sahar Road, Mumbai
  • Dynamic Mechanical, Thermal and Morphological behaviour of MAPP treated Sisal glass / PP Hybrid Composites
    Asia Rub Tech Expo International Conference
    2006, Nov. 23rd – 25th 2006, Kerala
  • Melt blended Polycarbonate / Clay Nanocomposites : A critical Study on Dynamic Mechanical and Morphological behaviour
    Asia Rub Tech Expo International Conference
    2006, Nov. 23rd – 25th 2006, Kerala
  • Mechanical, Thermal and Morphological behaviour of MAPP treated Jute-glass / PP Hybrid Composites
    Asia Rub Tech Expo International Conference
    2006, Nov. 23rd – 25th 2006, Kerala
  • Rheological Characterization of Sisal Fibre Reinforced PP Composites
    International Conference - Development in Composites : Advanced Infrastructural and Nanocomposites (ACUN 5)
    July 11th – 14th 2006, University of South, Sydney, Australia
  • Melt blended Polystyrene / Layered Silicate Nanocomposites : A Study on Mechanical, Thermal and Viscoelastic Behavior
    International Conference - Development in Composites : Advanced Infrastructural and Nanocomposites (ACUN 5)
    July 11th – 14th 2006, University of South, Sydney, Australia
  • LLDPE-Layered Silicate Nanocomposites : Effect of MAPE as compatibilizer on the Mechanical, Thermal and Crystallization behaviour
    International Conference - Development in Composites : Advanced Infrastructural and Nanocomposites (ACUN 5)
    July 11th – 14th 2006, University of South, Sydney, Australia
  • Sisal / HDPE Composites: Effect of MAPE as a Coupling Agent on morphological behaviour
    International Conference and Exhibition on Reinforced Plastics, (ICERP 2006)
    Feb. 23rd – 25th 2006, Chennai
  • The Effect of Organoclay on the Mechanical and Rheological Behaviour of PP – EOC blend Nanocomposites
    Fifth ISAMPE National Conference on Composites – Challenges in Composites (INCCOM - 5)
    Nov. 24th – 25th 2006, Hyderabad
  • Melt blended POM – TPU / Layered Silicate Nanocomposites : A Study on Dynamic Mechanical, Thermal and Morphological Behaviour
    Fifth ISAMPE National Conference on Composites – Challenges in Composites
  • Dynamic Mechanical, Thermal & Morphological Behaviour of Polycarbonate / Clay Layered Silicate Nanocomposites
    Fifth ISAMPE National Conference on Composites – Challenges in Composites (INCCOM - 5)
    Nov. 24th – 25th 2006, Hyderabad
  • Rheological characterization of Polypropylene Hybrid Composites reinforced with Glass and Banana Fibers: Effect of Coupling agent on the Morphological and Thermal Behaviour
    Fifth ISAMPE National Conference on Composites – Challenges in Composites (INCCOM - 5)
    Nov. 24th – 25th 2006, Hyderabad
  • Dynamic Mechanical Behaviour of MAPP modified Jute-Glass reinforced polypropylene composites
    Fifth ISAMPE National Conference on Composites – Challenges in Composites (INCCOM - 5)
    Nov. 24th – 25th 2006, Hyderabad
  • Preparation and Characterization of nano-crystaline alumina and its nanocomposites made of Acrylonitryle – Butidine – styrene polymer
    Fifth ISAMPE National Conference on Composites – Challenges in Composites (INCCOM - 5)
    Nov. 24th – 25th 2006, Hyderabad
  • Effect of Layered silicate clays on the Morphology and Dynamic Mechanical Properties of Polycarbonate Nanocomposite
    National Symposium on Emerging Trends in Polymer Science and Technology (ETPST – 2006)
    Sept. 8th – 9th 2006, IIT Kharagpur
  • Polypropylene / Ethylene-Octene Copolymer Blend Nanocomposites: Effect of Organoclay on the Mechanical and Rhelogical Properties
    National Symposium on Emerging Trends in Polymer Science and Technology (ETPST – 2006)
    Sept. 8th – 9th 2006, IIT Kharagpur
  • Polypropylene / Ethylene-Octene Copolymer Blend Nanocomposites: Effect of Organoclay on the Mechanical and Rhelogical Properties
    National Symposium on Emerging Trends in Polymer Science and Technology (ETPST – 2006)
    Sept. 8th – 9th 2006, IIT Kharagpur
  • Dynamic Mechanical, Thermal and Morphological Properties of Organoclay reinforced POM / TPU Nanocomposites
    National Symposium on Emerging Trends in Polymer Science and Technology (ETPST – 2006)
    Sept. 8th – 9th 2006, IIT Kharagpur
  • Thermal, Morphological behaviour of PALF / Glass Fiber reinforced PP Hybrid Composites: Effect of MAPP on the Dynamic Mechanical Properties
    National Symposium on Emerging Trends in Polymer Science and Technology (ETPST – 2006)
    Sept. 8th – 9th 2006, IIT Kharagpur
  • Studies on JUTE / Glass Fibre reinforced Polypropylene Hybrid Composites.
    National Symposium on Emerging Trends in Polymer Science and Technology (ETPST – 2006)
    Sept. 8th – 9th 2006, IIT Kharagpur
  • Influence of treated nanoclay in polypropylene / montmorillonite nanocomposites
    National Symposium on Emerging Trends in Polymer Science and Technology (ETPST – 2006)
    Sept. 8th – 9th 2006, IIT Kharagpur
  • Mechanical and Viscoelastic Properties of Sisal-HDPE composites : Effect of MAPE as Coupling Agent
    National Conference on Frontiers in Polymer Science and Technology, (Polymer 2006), organized by Polymer Science unit, IACS and the society for Polymer Science India
    Feb. 10th – 12th, 2006, Jadavpur, Kolkata
  • Nylon – 6 / Clay Intercalated Nanocomposites: A Critical Evaluation of Dynamic Mechanical Analysis and Morphology.
    National Conference on Frontiers in Polymer Science and Technology, (Polymer 2006), organized by Polymer Science unit, IACS and the society for Polymer Science India
    Feb. 10th – 12th, 2006, Jadavpur, Kolkata
  • Physico-Mechanical & Thermal Characterization of LLDPE layered silicate Nanocomposites
    International Conference on Blends, Alloys and Nanocomposites, (ICBC 2005)
    March 21st – 23rd 2005, Kottayam.
  • LLDPE layered Silicate Nanocomposites: Effect of compatibilizer on Mechanical, Thermal & Crystallization behavior
    International Conference on Materials for Advanced Technologies, ( ICMAT-2005)
    July 3rd –8th , 2005, Singapore
  • Mechanical and Rheological Characterisation of HDPE-Sisal Fibre Composites.
    National Seminar on “Recent Advances in Polymer Sciences and Technology” (RAPT – 05),
    Dec. 10th – 11th, 2005, Longowal, Punjab
  • Effect of PP-g-MAH as compatibilizer on Modified montmorillonite – PP Nanocomposites: A Critical Study on Mechanical, Thermal and Morphological Behaviour
    National Seminar on “Recent Advances in Polymer Sciences and Technology” (RAPT – 05),
    Dec. 10th – 11th, 2005, Longowal, Punjab
  • Dynamic Mechanical and Thermal Characterization of Polystyrene / Layered Silicate Nanocomposites.
    National Seminar on “Recent Advances in Polymer Sciences and Technology” (RAPT – 05),
    Dec. 10th – 11th, 2005, Longowal, Punjab
  • Mechanical and Viscoelastic Characterisation of HDPE – Sisal fibre Composites
    National Conference on Composites (INCCOM – IV) : High Performance Composites – Materials, Design & Manufacturing
    December 9 – 10, 2005, Amrita Viswa Vidyapitha, Coimbatore
  • Viscoelastic Behavior of Polystyrene/layered silicate nanocomposites
    National Conference on Composites (INCCOM – IV) : High Performance Composites – Materials, Design & Manufacturing
    December 9 – 10, 2005, Amrita Viswa Vidyapitha, Coimbatore
  • PP / Clay Nanocomposites: Effect of PP-g-MAH as compatibiliser on Mechanical, Thermal and Morphological behavior
    National Conference on Composites (INCCOM – IV) : High Performance Composites – Materials, Design & Manufacturing
    December 9 – 10, 2005, Amrita Viswa Vidyapitha, Coimbatore
  • Effect of Ethylene-Octene elastomer on the Mechanical & Thermal properties of Polypropylene
    National Conference on Recent Advances in Composites Materials
    Feb. 18th - 19th, 2005, NIT (NCRACM) Rourkela
  • Melt Compounded Nylon 6, & Polystyrene/Clay Nanocomposites: Mechanical & Thermal Characterization
    National Conference on Recent Advances in Composites Materials, (NCRACM-2005)
    Feb. 18th - 19th, 2005, NIT Rourkela
  • Rheological Characterization of Jute/PP Composite melts
    International Conference on Polymers for advanced technologies (MACRO -2004)
    Dec. 14th – 17th, 2004, Thiruvanthapuram
  • Viscoelastic Behavior of jute/HDPE Composites in molten state
    International Symposium on Advanced Materials and Processing ISAMAP2K4
    Dec. 6th - 7th, 2004, IIT Kharagpur.
  • Influence of coupling agent on the mechanical & viscoelastic behavior of HDPE/jute composites
    International Conference on Reinforced Plastics (RP- Asia-2004)
    Sept. 2nd - 3rd, 2004, Bangkok, Thailand
  • Weathering characteristics of jute Polyolefin composites
    International Conference and Exhibition on Reinforced Plastics, (ICERP 2004)
    Feb. 11th – 13th 2004, Chennai
  • Mechanical and Dynamicmechanical behaviour of HDPE / jute composites
    National Symposium on Nano materials and Composites (NSNC-2003)
    IATES Feb. 19th – 20th, 2004, Bhubaneswar
  • Performance of Novel Polyolefin / Montmorilonite Nanocomposites
    National Symposium on Nano materials and Composites (NSNC-2003)
    IATES Feb. 19th – 20th, 2004, Bhubaneswar
  • Environmental degradation behavior of natural fiber Polypropylene composites
    National Symposium on Engineering Polymers: Applications and Technology (EPAT 2003)
    Dec. 18th - 19th 2004, Amrita Institute of Technology, Coimbatore
  • Dynamic Mechanical behaviour of sisal/PP composites
    National Symposium on Engineering Polymers: Applications and Technology (EPAT 2003)
    Dec. 18th - 19th 2004, Amrita Institute of Technology, Coimbatore
  • Dynamic mechanical behavior of Jute/PP composites
    Symposium on Advances in Polymeric Building Materials (POLYBUILT 2003)
    March 6th – 7th, 2003, CBRI, Roorkee
  • Mechanical behavior &Viscoelastic properties of Sisal/PP composites
    National conference on “Plastics & Environment - Opportunities & Challenges, Shriram Institute of Industrial Research
    Feb. 24th – 25thNew Delhi
  • LLDPE-Layered Silicate Nanocomposites: Property Evaluation.
    INDO-GERMAN Workshop on Polymer Science & Technology
    Oct. 2nd– 4th, 2002, Rajkot
  • Physico-mechanical & Thermal Properties of Polypropylene-layered Silicate Nanocomposites
    International Conference, MACRO-2002
    Dec. 9th - 10th, 2002, IIT Kharagpur
  • Evaluation of Physico mechanical properties of Jute/PBT composites
    International Conference, MACRO-2002
    Dec. 9th - 10th, 2002, IIT Kharagpur
  • Effect of MAPP as coupling agent on the performance of Jute/PP composites
    National Conference on Composites, (ISAMPE) VSSC
    May 3rd - 4th, 2002. Thiruvananthapuram
  • Viscoelastic properties of Jute/PP composites
    Conference on progress in composite material (CPCM)
    Oct 18th - 20th, 2002, IIT Mumbai.
  • Surface modified Sisal/PP composites & its Physico-mechanical property evaluation
    National Symposium on Polymer Science (NASSIPOLYSCI)
    Dec. 3rd - 4th, 2002, Gujurat University, Gujurat
  • Mechanical & Thermal Characteristics of sisal/PP composites
    National Seminar on Bio-Degradable Polymers, Dec. 12th - 14th
    2002 Ravenshaw College, Cuttack
  • Plastics Waste Management – A Global Scenario
    National Seminar on Bio-Degradable Polymers
    Dec. 12th - 14th, 2002, Ravenshaw College, Cuttack

Prof. (Dr.) Sanjay K Nayak
Vice Chancellor
Ravenshaw University,
Odisha, India

(Former Director General - CIPET, Govt. of India)

Contact

Ravenshaw University,
College Square, Cuttack
Odisha - 753003.

www.ravenshawuniversity.com

drsknayak@gmail.com / vc@ravenshawuniversity.ac.in

Share Your Thoughts
Your message has been sent. Thank you!